1. Please Don't Underestimate These Things, The More They Are, The More Valuable They Are.

2. It's So Easy To Turn A Cylinder Into A Cuboid.

3. It's Ridiculous That A Good Repairman Can't Remove A Tiny Screw.

4. No Matter How Tough The Casing Is, This Machine Can Be Easily Removed.

5. Using This Small Electric Pick Doesn't Seem To Work At This Time.

6. This Little Guy Is Indispensable In The Tool Box And Can Save You A Lot Of Energy At Critical Times.

7. This Kind Of Machine Is Specially Customized And Difficult To Find On The Market.

8. Use This Sickle To Cut Tires, And You Can Tell By The Sound That It Must Be Very Sharp.

9. Perhaps Using This Gadget Is The Most Efficient Method Currently.

10. Pushing In One By One, It Looks Easy But Is Actually Quite Hard.

11. Maybe You Have Enough Strength, But Sometimes You May Not Be Able To Do Anything.

12. Never Disassemble It Violently, Otherwise You Will Regret It.

13. This Is A Machine That Requires You To Have Enough Strength To Control It.

14. Doesn’t It Look Fun To Use A Machine To Pull Out Copper Wire?

15. This Requires Sufficient Strength To Hold The Cutter Firmly To Avoid Injury.

16. Pavement Cutting Machine

17. It Turns Out That This Is How The Bearings Are Disassembled. #Machine #Automobile

18. Cuts Quickly And Evenly.

19. The Golden Saint's Armor Is Made Of This Material.😂

20. I Disassembled A Washing Machine Motor Today And The Copper Inside Turned Out To Be Silver.

21. A Machine For Peeling Steel.

22. I Feel Electric Cars Are More Flammable Than Gas Cars.

23. Copper Prices Have Risen Rapidly Recently.

24. Changing Tires Is No Longer A Laborious Task.

25. I Wonder If Wearing Just An Ordinary Mask Can Block The Dust?

26. Is There A Faster Method Than This?

27. Steel Nails Are In Huge Demand For Home Renovation Projects.

28. Enlarging The Hole Is A Difficult Job.

29. The Outdated Tricycle Is Equipped With A Push-Button Start Device.

30. A Motorcycle Is Forced To Be Scrapped After 10 Years Of Riding, But Its Engine Is Still Strong.

31. How Powerful Is The Impact Of A Pile Driver?

32. If The Side Of The Tire Is Damaged, It Must Be Vulcanized After Repair.

33. The Most Valuable Thing In A Used Motor Should Be The Copper Inside, Right?

34. These People Are So Bold And Don't Think About The Consequences.

35. Just One Machine Is Enough.

36. The Industry Of Recycling Waste Circuit Boards Is Developing Rapidly.

37. Why Must The Elbow Pass The Ball Test?

38. The Speed Of This Cutting Machine Is Astounding.

39. An Engine That Likes To Suck Fire

40. It Looks Like This Pair Of Scissors Must Be Very Powerful!

41. The Most Valuable Thing In A Scrapped Car Is Probably The Three-Way Catalytic Converter.

42. Does The Noise From Your Car Engine Annoy You?

43. This Way You Won't Get Your Hands Dirty When Cleaning.

44. Why Do People Like This Entertainment Project?

45. One Such Machine Can Improve Your Work Efficiency Several Times.

46. The Price Of Copper Has Been Rising Recently. Do You Know Why?

47. The Purpose Of Work Is To Make Life Better, Not Worse.

48. Drilling Is Not A Simple Matter Either.

49. This New Material Can Greatly Reduce The Cost Of Decoration.

50. I Think The Drilling Should Be To Install A Valve In This Building, Right?

51. What Is The Purpose Of Drilling Such A Big Hole?

52. This Small Screw Is In Great Demand And The Machines Operate 24 Hours A Day.

53. Do You Have A Sudden Impulse To Clean The Teeth With Tons Of Toothpaste?

54. To Produce The Nails, The Machine Runs 24 Hours A Day.

55. Unqualified Products Will Be Thrown Directly Into The Trash Can By This Machine.

56. My European Clients Had Hot Pot For The First Time And They Thought Chinese Hot Pot Was Delicious.

57. Today I Will Test Whether This Newly Purchased Cutting Blade Is Easy To Use.

58. Is Player No. 8 An Undercover Agent Sent By The Opposing Team?

59. Is It Hard To Open A Factory? Maybe All You Need Is A Machine.

60. You Think You Are Fully Prepared, But Often Still Fail.

61. This Time Of Year Is The Busiest, And Orders For A Year Are About To Be Handed Over.

62. As Long As You Work Hard, Iron Rods Can Also Be Ground Into Needles.

63. This Machine Cuts Rebar As Easily As Cutting Fruit Candy.

64. Renovating The House Requires Timely Cleaning Of Dust And Garbage, Take A Look At This Tool.

65. Its Speed Tricked My Eyes.

66. This Type Of Pipe Should Be Used On Very Important Projects To Prevent Liquid Or Gas Leakage.

67. This Machine Has The Functions Of Cutting Machine And Electric Drill At The Same Time.

68. Is This Traditional Craft Still Used Today?

69. Metal Round Rods Of Any Diameter Can Be Cut Off Instantly By This Machine.

70. Some People Say It's A 45-Degree Elbow, Some Say It's A 90-Degree Elbow, What Do You Think?

71. The Tallest Building In The World Is 828 Meters High, So How Is Its Steel Bar Connected?

72. Many People Worry That The Electric Wrench Is Not Strong Enough, So Let's Test It Today.

73. I Finally Understand What Cutting Iron Like Mud Is.

74. The Sales Volume Of This Machine Is Very Good This Year, And The Price Is Also Very Beautiful.

75. It Is Amazing That A Beam Of Flame Can Penetrate A 250Mm Thick Steel Plate.

76. Typhoon Dusuri Was So Powerful That Cars Were Submerged Wherever It Went.

77. Don't Underestimate This Light, It Can Reach High Temperature Instantly.

78. 90 Degree Elbow Must Prepare 2 Balls To Complete The Test.

79. This Is Currently The Largest Crawler Crane In The World, With A Single Crawler Weighing 50 Tons.

80. A Powerful Laser Beam Is Focused On The Metal Surface And Can Instantly Melt Any Material.

81. The Emergence Of Automation Will Put Many People Out Of Work, Which Is An Economic Conundrum.

82. It Takes Years To Build A Building, But A Moment To Tear It Down.

83. Any Shape You Want, It Can Come True.

84. It Is Very Difficult To Be A Factory Owner Now, And The Factory Is Short Of Young Workers.

85. If You Want To Start The Business Of Recycling Old Steel Bars, This Machine Is Perfect For You.

86. This Is A Ridiculous Disassembly Scene Without Professional Tools.

87. This Set Of Equipment Can Instantly Turn A Round Tube Into A Square Tube, Which Is Astonishing.

88. All Animals Are Spiritual, And They Know What You Are Doing Well To Them.

89. No Amount Of Glue Can Fix This Tire, Try This Method, The End Is Shocking.

90. This Process Is Essential If You Want To Process The Barrel Of The Tank.

91. This Machine Can Produce Gun Barrels For Tanks And Can Drill Holes In Any Material.

92. Would You Choose To Unclog A Clogged Drain This Way?

93. If You Have A Lot Of Farmland, It Is Best To Have A Tractor, It Will Be Your Good Helper.

94. This Kind Of Cement Pavement Is Easily Damaged, The Main Reason Is That It Is Too Thin.

95. Do You Think The Steel Bars That Have Been Welded And Lengthened Are Strong?

96. This Machine Cuts Steel As Easily As It Cuts Plasticine.

97. Is This Machine Specifically Designed To Destroy Ground?

98. Do You Throw Tires Directly Into The Trash When They Are Scrapped? This Video May Let You Know More.

99. Excessive Carbon Deposits Can Easily Lead To Engine Damage. Is This Approach Correct?

100. You Can Use It To Burn, Heat Or Boil Water.

101. This Machine Can Process Every Cut Part Very Clean And Smooth.

102. These Machines Work So Fast That My Hd Camera Can't Get A Good Picture Of The Screws.

103. Today, European Customers Come To The Factory To Inspect The Products, And They Feel Very Good.

104. The Windows In This House Are Too Small, I'm Going To Make Them Bigger To Let In More Sunlight.

105. Today European Customers Come To The Factory To Inspect The Finished Large Cold Heading Machine.

106. This Is Today's Newly Refined Rapeseed Oil, So Fresh, It Is Very Delicious To Use For Cooking.

107. It Takes A Lot Of Effort And Time To Disassemble The Rubber Belt. Is It Profitable?

108. Watching This Machine Up Close, Let Me Calculate How Many Can Be Done In 1 Minute?

109. There Is No Suitable Machine For This Product, So It Can Only Be Produced By Modifying The Machine.

110. This Is Edible Canola Oil, Which Is Extracted In This Way, And It Is Very Delicious For Stir-Frying.

111. This Is A Machine Dedicated To Destruction.

112. It Can Be Automatically Loaded For Tapping, Fully Automated Assembly Line.

113. The Necessary Vulcanizing Machine For Repairing Tires, The Effect After Repairing Is Astonishing.

114. This Fully Automatic Punching Machine Can Meet Your Arbitrary Changes To The Profile.

115. Tire Decomposition Machine, The Utilization Value Of Waste Tires Is Very High.

116. These Cables Only Look A Little Dirty On The Outside, But They Are All Intact On The Inside.

117. The Process Of Producing Cables Is Very Complicated, But Dismantling Only Takes Tens Of Seconds.

118. The Astonishing Casting Site Worked Day And Night In Order To Complete It In One Go.

119. Such A Large Roll Of Cable Is Not Only Expensive To Manufacture, But Also Expensive To Transport.

120. Carpet Cleaning Can Be A Pain In The Ass And This Machine Can Get It Super Clean.

121. In Fact, The Manufacturing Process Of Round Tubes Is More Difficult Than That Of Square Tubes.

122. Well, I Admit I Can't Do This Job Because I'm Impatient, I'm Afraid!

123. This Machine Can Cut The Pipe Into The Shape You Want, It Is Amazing.

124. Take Out The Steel Wire Inside, And The Rubber Can Also Be Processed Into Gaskets.

125. Countless Steel Wires As Thin As A Hair Are Combined To Become A Strong Steel Wire Rope.

126. It Looks Like They Are Knitting Woolen Sweaters, But These Are Actually Steel Wire Mesh.

127. This Is Really To Make The Steel Plate Into A Sieve, And It Is Arranged Regularly.

128. At Present, No Advanced Production Lines Have Been Introduced, And This Is The Only Way To Do It.

129. This Equipment Can Quickly Cut Thick-Walled Steel Pipes Without Any Burrs On The Cutting Surface.

130. This Equipment Can Not Only Drill Holes But Also Tap Threads, Which Is A Must For Processing Plants.

131. The Nails Of This Nail Gun Are In Great Demand. Does The Test In The Video Satisfy You?

132. The Continuous Advancement Of Technology Has Replaced Many Manual Jobs. What Can I Do In The Future?

133. It Can Be Installed On A Hillside, And It Can Also Automatically Find Sunlight. Original Sound Video

134. This Is A Tapping Machine, It Can Be Used For Different Threads, What Do You Think?

135. As Long As It Is Not 180°, This Machine Can Meet Any Angle You Need, And It Is Convenient.

136. If You're A Fitness Buff, This Machine Probably Won't Do You Any Good.

137. This Machine Cuts Such A Large Round Bar Like Cutting Chocolate, Very Silky.😆😆😆

138. The Two Ends Of A Pipe Are Flattened To Form A Bracket. This Design Is Very Interesting.

139. This Is To Drain The Stagnant Water Inside When The Bridge Is Built, Which Seems Very Simple.

140. With This Machine, I Can Start A Scrap Motor Recycling Business, Because Copper Is Very Valuable.

141. The Cutting Pipe Is As Simple As Cutting Chocolate, And Any Shape Can Be Satisfied.

142. Don't Worry About The Hammer Flying Away When You Are Ready To Hit The Object With Force.😄😄😄

143. Heat The Gear To A Certain Temperature And Then Quickly Cool It With Water.

144. Customer's Customized Product, Do You Know Where This Product Is Used?

145. Walking Into The Forging Factory To Visit, This Kind Of Craftsmanship Is Amazing.

146. This Car Wash Seems To Have A Very Good Car Wash Effect, And There Is No Need For Manual Scrubbing.

147. The Efficiency Of This Punching Machine Is Really Too High, And It Looks Very Decompressed.

148. The Process By Which A Round Steel Pipe Becomes A Rectangular Steel Pipe Is Astounding.amazing Video

149. This Is How Large Springs Are Produced, Amazing Workmanship.

150. This Is The First Process In The Production Of Fasteners, Wire Drawing. Original Sound Video

151. In The Production Process Of 45° Seamless Elbow, These Two Steel Balls Are Very Important.

152. Threads Need To Be Processed On The Steel Pipe, This Machine Can Help You Solve It Quickly.

153. Do You Know How Square Tubes Are Made? It Turned Out To Be A Round Tube?

154. This Drill Bit Does Not Need To Add Water When Drilling Steel Plates. How Many Times Can It Be Used?

155. The Copper Wire Inside The Old Cable Can Be Processed Into The Artwork You Want.

156. I'm Sure That None Of These Wires Have Been Used Before, Are They Substandard Products?

157. This Pair Of Scissors Can Easily Cut The Cable, Don't You Believe It?

158. This Is A Machine Dedicated To Violent Destruction.

159. In Fact, If The Pressure Of The Fuel Injector Is Too Low, It Will Also Spray Fire.

160. With This Machine, No Matter How Complicated The Lines Are, They Can Be Sewn With Ease.

161. The Pipes Cut Out By This Automatic Pipe Cutting Machine Are Neat And Smooth, With High Efficiency.

162. This Green Fence Net Is Widely Used By People, Take A Look At Its Production Process!

163. If The Screw Is Rusted And Cannot Be Removed, Try This Method.

164. It's A Good Business To Buy A Machine Like This And Recycle The Old Cables And Sell The Copper.

165. I'm Sure This Thing Must Feel Good To The Touch! Original Sound Video

166. Recycling These Discarded Aluminum Cans Is Actually A Lucrative Job.

167. This Machine Allows You To Easily Disassemble Scrap Tires And Get More Value!

168. Do You Think This Rope Is Strong?

169. On The First Day Of The Canton Fair On April 15, 2023, There Are Really Many People Participating!

170. This Machine Is So Sharp, It's As Easy As Cutting Cardboard.

171. If These Were Coins, I'd Be Happy Working Every Day!

172. I Think This Connection Form Is As Strong As Welding, And It Is Very Convenient.

173. Amazing Workmanship, Be Sure To Wear A Protective Mask Before Working!

174. If Your Car Tire Is Broken, Please Don't Throw It Away, Maybe It Can Be Made Into Other Products.

175. I Don't Get It, Why Would A Brand New Wire Be Destroyed?

176. This Machine Can Instantly Turn Round Tubes Into Square Tubes.

177. Did You Know That The Scrap Tires You Throw Away Have A High Value For Use?

178. The Fence Net Used To Protect The Yard Is Made With This Machine,Very Strong.

179. The Copper In The Cable Is Expensive, So It's Worth It For Us To Do This.

180. I Posted A Production Video Of A Small Nail Yesterday, And A Production Video Of A Big Nail Today.

181. With A Few Machines, Your Factory Is Established!

182. Do You Know What Product This Is? I Believe Many People Have Not Seen It!

183. This Is Not A Net That Can Be Cut Through With A Knife.

184. In The Past Two Years, Fewer And Fewer People Are Willing To Do This Job!

185. It Would Be Great If It Was Coins!

186. The Machine Keeps Running, But The Profit Is Very Low.

187. There Are More Orders, And The Machine Runs 24 Hours A Day.

188. What Do You Think Of A Machine That Specializes In Peeling Skin?

189. Machine Stretch Forming, Amazing.

190. The Donkey's Toenails Are So Long That It Affects His Normal Walking.

191. 建築 裝修工程 原聲視頻︱Construction And Decoration Project Original Sound Video